
Pump Supply & Installation
Pressure, transfer, sump and stormwater pumps sized to your head height and flow demand, installed with proper isolation and electrical connection.
Residential Plumbing
Pressure pumps, tank pumps, sump and transfer pumps — supplied, installed, serviced and replaced by licensed plumbers who size the pump to the job.
Licensed plumbers
Most pump problems we're called to aren't the pump's fault — it was the wrong size, plumbed with restrictive fittings, or left without dry-run protection. We work out the flow and head your property actually needs, select a pump that runs comfortably inside its curve, and install it with the isolation, strainer and controls that make servicing simple later.

What we do

Pressure, transfer, sump and stormwater pumps sized to your head height and flow demand, installed with proper isolation and electrical connection.

Seals, impellers, bearings, pressure switches and non-return valves repaired before a small fault turns into a burnt-out motor.

Like-for-like swaps or an upgrade to a quieter, more efficient unit — usually completed same visit once we've confirmed the specification.

Controllers, float switches, mains changeover and dry-run protection so the pump starts when it should and never runs itself dry.
Warning signs
Rapid cycling usually means a failed pressure switch, waterlogged vessel or a leak on the line.
Worn impellers, blocked strainers and undersized pumps all show up as poor flow at the tap.
A pump that never shuts off is wasting power and heading for a failure — often from a leak or dry supply.
Without a working changeover, an empty tank leaves the house with no water at all.
No water because the pump has failed? We run emergency call-outs 24/7.
Call 1800 172 743Our work




Pump supply, repair, replacement and automation across Greater Sydney and the Lower Blue Mountains — call 1800 172 743.